![]() Reapply Metal Prep, dry with paper towel or lint-free cloth, and allow 2-3 hours for Metal Prep to cure. Use a paper towel to dry, wiping in a smooth, even direction. If any rust spots remain, soak spots with a chamois, paper towel, or any absorbent material and allow it to sit anywhere from 20 minutes to two hours. ![]() While wet with Metal Prep, wipe the surface with a clean cloth in a smooth, even direction. Scuff with a nylon scuff pad, making sure the surface is smooth and clean. If the rust is heavier, let the Metal Prep soak and give it time to dissolve. Methods of application: Spray, brush, or wipe on to metal surfaces. Mastercoat® Metal Prep & Rust Remover delivers years of extra wear to a paint job. Don’t put cheap spray can primer on parts you just stripped! Simply moisten the rag and wipe the part down with a thin layer of the prep. The zinc phosphate coating, especially with ordinary paints, will prevent rust from forming under your new paint work.įor parts and panels storage, Mastercoat® Metal Prep & Rust Remover will clean and derust, leave a zinc phosphate coating, and will last for a year indoors without rusting. It also neutralizes the rust, deep within the steel. Mastercoat® Metal Prep & Rust Remover etches the steel and leaves a zinc phosphate coating behind. It will dissolve light to moderate surface rust and has a detergent action to get rid of grease and oils. Mastercoat® Metal Prep & Rust Remover is a must for quality restoration work.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |